{"title":"Healtech Exhaust Servo Eliminator Suzuki","description":"\u003ch1\u003eHealTech Exhaust Servo Eliminators\u003c\/h1\u003e\u003cp\u003eShop our range of \u003cstrong\u003eHealTech Exhaust Servo Eliminators (ESE)\u003c\/strong\u003e, designed to allow the factory motorcycle exhaust servo motor and valve system to be removed without triggering unwanted FI warning lights or ECU fault codes.\u003c\/p\u003e\u003cp\u003eMany modern motorcycles use an electronically controlled \u003cstrong\u003eexhaust valve or EXUP system\u003c\/strong\u003e operated by a servo motor and cables. When fitting an aftermarket exhaust, full system or removing the original exhaust valve, disconnecting the factory servo motor can cause the ECU to detect a fault and illuminate the FI warning light.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eHealTech Exhaust Servo Eliminator\u003c\/strong\u003e electronically replaces the signal expected from the original servo motor, allowing the bulky factory servo, cables and associated components to be removed while keeping the ECU satisfied.\u003c\/p\u003e\u003cp\u003eHealTech ESE modules are extremely compact and use \u003cstrong\u003emodel-specific Plug 'n Go connectors\u003c\/strong\u003e, requiring no cutting, soldering or permanent modification to the original motorcycle wiring. Simply disconnect the factory servo motor and connect the HealTech eliminator to the OEM connector.\u003c\/p\u003e\u003cp\u003eRemoving the original exhaust servo system can also help \u003cstrong\u003ereduce weight and free up useful space\u003c\/strong\u003e, with HealTech stating that removal of the servo motor, cables and associated wiring can save up to approximately 1 kg depending on the motorcycle.\u003c\/p\u003e\u003cp\u003eHealTech Exhaust Servo Eliminators are compatible with \u003cstrong\u003eaftermarket slip-on exhausts, full exhaust systems and selected standard exhaust configurations\u003c\/strong\u003e, making them a practical solution for exhaust upgrades, race builds and motorcycles with a failed original exhaust servo system.\u003c\/p\u003e\u003cp\u003eBrowse our \u003cstrong\u003eHealTech Exhaust Servo Eliminator\u003c\/strong\u003e collection at P3 Tuning and find the correct ESE module for your motorcycle.\u003c\/p\u003e\u003cp\u003eFor closed-course competition use where required by local regulations.\u003c\/p\u003e","products":[{"product_id":"suzuki-b-king-non-abs-2008-2012-exhaust-servo-eliminator-module-healtech","title":"Suzuki B-King [non-ABS] 2008-2012 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554789892479,"sku":"ESE-S01","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-b-king-abs-2008-2012-exhaust-servo-eliminator-module-healtech","title":"Suzuki B-King [ABS] 2008-2012 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554789925247,"sku":"ESE-S01","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-boulevard-c109r-t-2008-2015-exhaust-servo-eliminator-module-healtech","title":"Suzuki Boulevard C109R\/T 2008-2015 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554789958015,"sku":"ESE-S01","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-boulevard-m109r-r2-2006-2026-exhaust-servo-eliminator-module-healtech","title":"Suzuki Boulevard M109R\/R2 2006-2026 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554789990783,"sku":"ESE-S01","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-gsx-r600-2006-2010-exhaust-servo-eliminator-module-healtech","title":"Suzuki GSX-R600 2006-2010 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554790023551,"sku":"ESE-S01","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-gsx-r750-2006-2010-exhaust-servo-eliminator-module-healtech","title":"Suzuki GSX-R750 2006-2010 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554790056319,"sku":"ESE-S01","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-gsx-r1000-2001-2008-exhaust-servo-eliminator-module-healtech","title":"Suzuki GSX-R1000 2001-2008 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554790089087,"sku":"ESE-S01","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-gsx-s1000-f-a-fa-2015-2017-exhaust-servo-eliminator-module-healtech","title":"Suzuki GSX-S1000 \/F \/A \/FA 2015-2017 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554790121855,"sku":"ESE-S01","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-intruder-c1800r-2008-2015-exhaust-servo-eliminator-module-healtech","title":"Suzuki Intruder C1800R 2008-2015 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554790154623,"sku":"ESE-S01","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-intruder-m1800r-2006-2023-exhaust-servo-eliminator-module-healtech","title":"Suzuki Intruder M1800R 2006-2023 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554790187391,"sku":"ESE-S01","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-vlr1800-2008-2015-exhaust-servo-eliminator-module-healtech","title":"Suzuki VLR1800 2008-2015 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554791039359,"sku":"ESE-S01","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-vzr1800-2006-2024-exhaust-servo-eliminator-module-healtech","title":"Suzuki VZR1800 2006-2024 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554791104895,"sku":"ESE-S01","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-dl1000-v-strom-2014-2016-exhaust-servo-eliminator-module-healtech","title":"Suzuki DL1000 V-Strom 2014-2016 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554794086783,"sku":"ESE-S02","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-gsr750-non-abs-2011-2017-exhaust-servo-eliminator-module-healtech","title":"Suzuki GSR750 [non-ABS] 2011-2017 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554794414463,"sku":"ESE-S02","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-gsr750-abs-2011-2017-exhaust-servo-eliminator-module-healtech","title":"Suzuki GSR750 [ABS] 2011-2017 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554794709375,"sku":"ESE-S02","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-gsx-r600-2011-2026-exhaust-servo-eliminator-module-healtech","title":"Suzuki GSX-R600 2011-2026 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554795004287,"sku":"ESE-S02","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-gsx-r750-2011-2026-exhaust-servo-eliminator-module-healtech","title":"Suzuki GSX-R750 2011-2026 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554795757951,"sku":"ESE-S02","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-gsx-r1000-2009-2016-exhaust-servo-eliminator-module-healtech","title":"Suzuki GSX-R1000 2009-2016 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554796020095,"sku":"ESE-S02","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-gsx-s750-2015-2023-exhaust-servo-eliminator-module-healtech","title":"Suzuki GSX-S750 2015-2023 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554796151167,"sku":"ESE-S02","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-gsx-s750z-2017-2023-exhaust-servo-eliminator-module-healtech","title":"Suzuki GSX-S750Z 2017-2023 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554796282239,"sku":"ESE-S02","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-gsx-s950-2022-2023-exhaust-servo-eliminator-module-healtech","title":"Suzuki GSX-S950 2022-2023 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554796773759,"sku":"ESE-S04","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-gsx-s1000-f-a-fa-2018-2026-exhaust-servo-eliminator-module-healtech","title":"Suzuki GSX-S1000 \/F \/A \/FA 2018-2026 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554796872063,"sku":"ESE-S04","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-gsx-s1000-gt-gt-gta-2022-2023-exhaust-servo-eliminator-module-healtech","title":"Suzuki GSX-S1000 \/GT \/GT+ \/GTA 2022-2023 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554796904831,"sku":"ESE-S04","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-gsx-s1000s-katana-2019-2026-exhaust-servo-eliminator-module-healtech","title":"Suzuki GSX-S1000S Katana 2019-2026 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554796970367,"sku":"ESE-S04","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-gsx-s1000z-2018-2022-exhaust-servo-eliminator-module-healtech","title":"Suzuki GSX-S1000Z 2018-2022 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554797035903,"sku":"ESE-S04","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-dl1000-v-strom-2017-2020-exhaust-servo-eliminator-module-healtech","title":"Suzuki DL1000 V-Strom 2017-2020 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554797068671,"sku":"ESE-S05","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-dl1000xt-v-strom-2017-2020-exhaust-servo-eliminator-module-healtech","title":"Suzuki DL1000XT V-Strom 2017-2020 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554797101439,"sku":"ESE-S05","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-gsx-r1000-2017-2026-exhaust-servo-eliminator-module-healtech","title":"Suzuki GSX-R1000 2017-2026 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554797134207,"sku":"ESE-S05","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-gsx-r1000r-2017-2026-exhaust-servo-eliminator-module-healtech","title":"Suzuki GSX-R1000R 2017-2026 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554797199743,"sku":"ESE-S05","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-gsx-r1000rz-2022-2025-exhaust-servo-eliminator-module-healtech","title":"Suzuki GSX-R1000RZ 2022-2025 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554797265279,"sku":"ESE-S05","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-gsx-r1000x-2019-2020-exhaust-servo-eliminator-module-healtech","title":"Suzuki GSX-R1000X 2019-2020 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554797298047,"sku":"ESE-S05","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-gsx-s1000-gt-gt-gta-2024-2026-exhaust-servo-eliminator-module-healtech","title":"Suzuki GSX-S1000 \/GT \/GT+ \/GTA 2024-2026 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554797330815,"sku":"ESE-S05","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-gsx-s1000-gx-2024-exhaust-servo-eliminator-module-healtech","title":"Suzuki GSX-S1000 GX 2024 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554797363583,"sku":"ESE-S05","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-gsx-s1000-gx-gx-2025-2026-exhaust-servo-eliminator-module-healtech","title":"Suzuki GSX-S1000 GX \/GX+ 2025-2026 - Exhaust servo eliminator module Healtech","description":"\u003cp\u003e\u003cb\u003eHighlights \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAwesome Tech \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. Just plug it in and enjoy the ride!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe unit itself is almost smaller than the OEM connector it connects to.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with all aftermarket slip-ons, full systems and even with the stock exhaust.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIntroduction\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOEM exhaust cans and systems won’t win a beauty contest these days (and rarely did they in the past), they weigh a lot more than the aftermarket counterparts, sound crap and you never reach the bike’s full potential with them. Whatever is the reason to change your end-can or whole system, removing the exhaust valve will leave you with the dreaded FI light. Install the ESE to take care of that so that the FI light will come on only when it has to – when there’s a trouble with the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"title-heading-left\" data-fontsize=\"42\" data-lineheight=\"58\"\u003e\n\u003cspan\u003eAbout the \u003c\/span\u003eExhaust Servo Eliminator\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRegain useful space while shedding weight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis tiny little fella will eliminate the bulky, heavy and space wasting OEM servo motor with the operating cables and wiring, which can save up to 1 kg and frees up a lot of under seat storage. Also, you may now get rid of the exhaust valve too by replacing the exhaust system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAwesome Tech\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBuilt-in microprocessor ensures optimal function and offers great compatibility. If your bike is equipped with an exhaust servo, you’ll need an ESE module – either if you replace the exhaust system or add a fuel controller module (or both).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ‘n Go install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll ESE models are Plug ‘n Go, installation is a breeze. Just locate the exhaust servo motor under the rider\/passenger seat, disconnect the plugs, plug in the ESE to the OEM connector and that’s it, you’re ready for the ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2-year replacement warranty from the date of purchase (invoice copy required)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSize \u0026amp; Weight\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 25g (0.88oz) (with wiring)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/ESE_flyer_2017_grande.jpg?v=1525772365\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/Dyno_graph_header_edit2_grande.png?v=1487253714\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57554797396351,"sku":"ESE-S05","price":48.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/products\/HealTech-Exhaust-Servo-Eliminator__P3_tuning_copy_3fd76293-7392-4420-b5b5-58bad2e32551.png?v=1661461468"},{"product_id":"suzuki-gsx-s1000-gx-2024-healtech-exhaust-servo-eliminator-healtech","title":"Suzuki GSX-S1000 GX 2024 - Healtech Exhaust Servo Eliminator Healtech","description":"\u003ch2\u003e\u003cspan class=\"fusion-highlight custom-textcolor highlight1 awb-highlight-background\"\u003eControlled electronic suspension eliminator module\u003c\/span\u003e\u003c\/h2\u003e\n\u003cdiv class=\"fusion-title title fusion-title-2 fusion-sep-none fusion-title-text fusion-title-size-four\"\u003e\n\u003cp class=\"fusion-title-heading title-heading-left fusion-responsive-typography-calculated\"\u003eThe CES Eliminator enables the disconnection of the electronic (mechatronic) suspension component from the motorcycle’s main wiring harness without getting an FI error code. \u003cspan class=\"s1\"\u003eNo cutting and splicing is required for installation. Transform the bike back to factory setup anytime effortlessly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote for the CESE-01 module:\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eEach electronic suspension component requires a separate CESE module (2pcs at the front, 2pcs at the rear).\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote for the CESE-02\/03 modules:\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eOne CESE module disables ALL electronic suspension components on the motorcycle.\u003cbr\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"width: 100%; float: left; position: relative; padding: 0 0 40px 0; textalign: center;\"\u003e\n\u003cembed src=\"https:\/\/www.healtech-electronics.com\/docs\/SMAdvisor\/index.php\" scrolling=\"auto\" height=\"400\" frameborder=\"0\" width=\"50%\"\u003e\n\u003c\/div\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57623169663359,"sku":"CESE-05","price":74.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/CESE-1536x960Large.png?v=1779812952"},{"product_id":"suzuki-gsx-s1000-gx-gx-2025-2026-healtech-exhaust-servo-eliminator-healtech","title":"Suzuki GSX-S1000 GX \/GX+ 2025 - 2026 - Healtech Exhaust Servo Eliminator Healtech","description":"\u003ch2\u003e\u003cspan class=\"fusion-highlight custom-textcolor highlight1 awb-highlight-background\"\u003eControlled electronic suspension eliminator module\u003c\/span\u003e\u003c\/h2\u003e\n\u003cdiv class=\"fusion-title title fusion-title-2 fusion-sep-none fusion-title-text fusion-title-size-four\"\u003e\n\u003cp class=\"fusion-title-heading title-heading-left fusion-responsive-typography-calculated\"\u003eThe CES Eliminator enables the disconnection of the electronic (mechatronic) suspension component from the motorcycle’s main wiring harness without getting an FI error code. \u003cspan class=\"s1\"\u003eNo cutting and splicing is required for installation. Transform the bike back to factory setup anytime effortlessly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote for the CESE-01 module:\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eEach electronic suspension component requires a separate CESE module (2pcs at the front, 2pcs at the rear).\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote for the CESE-02\/03 modules:\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eOne CESE module disables ALL electronic suspension components on the motorcycle.\u003cbr\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"width: 100%; float: left; position: relative; padding: 0 0 40px 0; textalign: center;\"\u003e\n\u003cembed src=\"https:\/\/www.healtech-electronics.com\/docs\/SMAdvisor\/index.php\" scrolling=\"auto\" height=\"400\" frameborder=\"0\" width=\"50%\"\u003e\n\u003c\/div\u003e","brand":"Healtech","offers":[{"title":"Default Title","offer_id":57623169696127,"sku":"CESE-05","price":74.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/files\/CESE-1536x960Large.png?v=1779812952"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1636\/7019\/collections\/healtech_3d7f3136-e4ae-485f-8391-e69e8bdcd056.png?v=1789237133","url":"https:\/\/p3tuning-performanceparts.com\/collections\/healtech-exhaust-servo-eliminator-suzuki.oembed","provider":"P3Tuning","version":"1.0","type":"link"}