Ducati Throttle Play Spacer Kit.
Fly by wire Throttle assemblies naturally have a lot of play in them. We Have decided to fix this problem by designing a spacer kit that is inexpensive.
In the kit you get 2 Cup spacers which will take away the rotational slop.
(You will require a Y-tip 3 bit for the x2 security screws and a Phillips bit for x2 other screws) You are required to remove all 4 screws that hold the throttle housing and also the cable-tie which holds the small black metal bracket to slide the bottom throttle housing down to remove the throttle tube. (The top and bottom throttle housing both have a lug to hold the throttle tube in place)
(PLEASE BE AWARE X2 OF THE SCREWS HOLDING THE THROTTLE HOUSE ARE SECURITY SCREWS NOT PHILLIPS SCREWS AS PER MANY YOUTUBE BLOGGERS STATE)
If you have any questions or want to know if it fits your bike which isn't stated here, please send a picture of your throttle assembly.
Ducati Models:
Panigale V4 - 2018+
Streetfighter V4 - 2020+
Streetfighter V4S - 2020+
Panigale V2 2020+
Panigale 899 - 2012-19
Panigale 959 - 2012-19
Panigale 1199 - 2012-19
Panigale 1299 - 2012-19
Monster 821 - 2017+
Monster 1200 - 2017+
Monster 1200S - 2017+
2016+ Monster 1200R
Diavel 1260S - 2019+
Diavel 1260 - 2019+
Multistrada 950 - 2017+
Multistrada 1260 - 2017+
Multistrada V4 - 2017+
Supersport - 2017+
Supersport S - 2017+
If you have any additional questions over this or any other tuning modification, please do not hesitate to get in touch. Kind regards P3 Tuning Ltd
![](https://cdn.shopify.com/s/files/1/1636/7019/files/Racetorxendimage_600x600.png?v=1670078174)